Thursday, October 1, 2020
Standard Penetration Test (SPT), WHAT IS PROCEDURE OF STANDARD PENETRATION TEST?
Standard Penetration Test (SPT)
The SPT is carried out in a borehole, while SCPT is carried out without a borehole.
These tests examined the resistance of soil strata to penetration.
• This is the most completely used penetrometer test and employs a split spoon sampler.
The SPT is carry-out by driving a standard split spoon sampler into the ground by blows from a drop hammer of mass 64 kg drop-down760 mm.
The sampler is driven 150 mm into the soil at the bottom of the borehole and the number of blows (N) essential to drive it an additional 300 mm counted.
The number of blows (N) is represented by the standard penetration number.
Subscribe to:
Post Comments (Atom)
दिल्ली सहारनपुर देहरादून एक्सप्रेसवे
9 निर्माण फर्मों ने 18 मई 2022 को 210 किलोमीटर दिल्ली-सहारनपुर-देहरादून एक्सप्रेसवे के चरण 3 के 18.47 किलोमीटर पैकेज 2 के निर्माण क...
-
Embedment length The length of embedded steel reireinforcement, 1 provided beyond a critical section. The fibre length also defines the e...
-
Geo metrics of hill Roads the roads in hills need special attention in fixing up geometric standard for gradient, super elevation, radius ...
No comments:
Post a Comment